Effectively Warn Pilots of Closed Runways and Taxiways
NAC's temporary closure markers are designed to comply with FAA Advisory Circular No: 150/5370-2G, Advisory Circular No: 150/5340-1M, and Advisory Circular No: 150/5390-2C performance requirements for use during airport construction projects. NAC has manufactured airfield closure markers for over 23 years and are constructed of heavy vinyl-windscreen material with fused overlapping centers allowing for easy and fast placement. The rolled-rim brass grommets are hemmed along the marker boarder to anchor or sandbag in place. The FAA requires temporarily closed runways and new runways not yet open to aircraft to use a yellow X on each end of the runway, a yellow X marker is used at the entrance to the closed taxiway from the runway, and a yellow X is placed over the “H” for a heliport is closures. An optional back boarder can be added making the markers very visible to pilots. Because of the material design, these markers can withstand a 25 mph surface wind with out any anchors (anchors or sandbags is recommend) unlike less costly and cheaper “tarp” material markers that constantly move with any gust of wind.
NAC's Temporary Runway Closure “X” Marker is yellow with black border made exclusively for airports. Our markers are the toughest, highest quality, ultra-violet resistant vinyl coated windscreen mesh on the market. Our single marker design prevents roll-up and folding caused by wind gusts.
NO MORE OVERLAPPING SECTIONS, ONE FULL PIECE MARKER!
(NSN 9905-01-494-2925)
NAC's Temporary Runway Closure “X” Marker is yellow and made exclusively for airports. Our markers are the toughest, highest quality, ultra-violet resistant vinyl coated windscreen mesh on the market. Our single marker design prevents roll-up and folding caused by wind gusts.
NO MORE OVERLAPPING SECTIONS, ONE FULL PIECE MARKER!
(NSN 9905-01-494-2925)
NAC's Temporary Runway Closure “X” Marker is White and made exclusively for Canada airports. Our markers are the toughest, highest quality, ultra-violet resistant vinyl coated windscreen mesh on the market. Our single marker design prevents roll-up and folding caused by wind gusts.
NO MORE OVERLAPPING SECTIONS, ONE FULL PIECE MARKER!
H.S 5603.11.9949
Meets ICAO Performance Specifications
NAC's new patented design, the L-893X(L) LED Temporary Runway Closure “X” Marker is a reliable, efficient, and environmentally friendly visual aid for airports. Continuous operation involves flashing directional LED lamps every 2.5 seconds and is powered by a combination of dual batteries and generator. A ground power cord allows for easy system charging or can be used in connecting a back-up generator, if needed. The L-893X(L) will operate for 3-4 days (time may vary with altitude and outside temperatures) using only 20 gallons of fuel. Run-times can be extended by adding solar panels(sold separately).
Closed heliport. Obliterate all markings of a permanently closed heliport, FATO, or TLOF. If it is impractical to obliterate markings, place a yellow “X” over the “H” as illustrated in Figure 2–27. Make the yellow “X” large enough to ensure early pilot recognition that the heliport is closed. Remove the wind cone(s) and other visual indications of an active heliport.
NAC's Temporary Taxiway Closure “X” Marker is yellow with black border made exclusively for airports. Our markers are the toughest, highest quality, ultra-violet resistant vinyl coated windscreen mesh on the market. Our single marker design prevents roll-up and folding caused by wind gusts.
NO MORE OVERLAPPING SECTIONS, ONE FULL PIECE MARKER!
NAC's Temporary Taxiway Closure “X” Marker is yellow with black border made exclusively for airports. Our markers are the toughest, highest quality, ultra-violet resistant vinyl coated windscreen mesh on the market. Our single marker design prevents roll-up and folding caused by wind gusts.
NO MORE OVERLAPPING SECTIONS, ONE FULL PIECE MARKER!
NAC's Temporary Runway Threshold Displacement Package includes Four(4) Displaced Arrowheads, One(1) Arrowhead with Tail, and One(1) Runway Displaced Threshold Bar.
Drop-In Steel Anchor with 3/8" bolt kit for concrete and asphalt used to secure closure markers.
INCLUDES:
- 3/8"-16 Bolt
- 1-5/8" Minimum Embedment Sleeve
*Box of 50 EA
Sand bags are composed of woven polypropylene and is resistant to punctures and tears. Expected life is 1,600 hours in the sun. Each bag comes with a built-in tie.