10ft x 60ft Temporary Runway "X" YELLOW Closure Marker
NAC's Temporary Runway Closure “X” Marker is yellow and made exclusively for airports. Our markers are the toughest, highest quality, ultra-violet resistant vinyl coated windscreen mesh on the market. Our single marker design prevents roll-up and folding caused by wind gusts and our matrix material markers can be positioned using either sandbags, metal anchors, or stakes (sold separately). Used safely at over 500 airports worldwide since 1998!
How do you comply with the FAA policy for marking a RWY Temporarily "CLOSED"?
NAC’s Runway “X” Closure Markers provide airports with a cost-effective alternative to traditional tarp or plastic fence markings. Tested under actual runway conditions for civilian and military runways, the NAC Runway “X” Closure Marker effectively warns pilots of closed runways and taxiways. Durable 10ft x 60ft yellow vinyl-coated windscreen material using #2 brass rolled-rim spur grommets(116) installed through hem at 0.76m (2'.6" spacing) intervals along marker perimeter. A SINGLE MARKER WITH NO OVERLAP CENTER ALLOWING THE PERFECT "X" EVERY TIME IN MARKING YOUR "RUNWAY CLOSED".
*** Meets FAA Performance Specifications ***
Sandbags and steel anchors sold separately.
A Vinyl Windscreen System, manufactured by NAC, consists of 2 sections fused as one piece and is 60ft x 10ft yellow marker using No. 2 brass rolled-rim spur grommets installed through hem at 0.76m (30-inch) intervals along marker perimeter.
Material Properties Value
Fabric Base Polyester
Weave Count 11 x 11, 1000 Denier
Total Weight 3.5 oz./sq. yd
Finished Coated Weight 10.0 oz./sq. yd
Tongue Tear, Method 5134 120/110 lbs.
Grab Tensile, Method 5100 200/180 lbs.
Burst Strength 250 lbs/psi
Cold Crack MIL-C-20696C Pass -40 degrees F
Flame Resistance, Method 5903 Pass 2 second timeout
Life-time warranty covering materials and workmanship.