THIS NAC-DYNAMIC FRICTION DECELEROMETER® (NAC-DFD®) MOBILE APP IS OWNED BY NAC DYNAMICS, LLC ("NAC") AND IS PROTECTED UNDER COPYRIGHT LAWS, INTERNATIONAL COPYRIGHT TREATIES AND OTHER INTELLECTUAL PROPERTY LAWS. THIS SOFTWARE IS LICENSED, NOT SOLD. THIS PRODUCT AND SOFTWARE IS PROVIDED UNDER THE FOLLOWING LICENSE WHICH DEFINES WHAT YOU MAY DO WITH THE NAC-DFD® SOFTWARE CONTAINS USAGE RESTRICTIONS AND LIMITATIONS ON WARRANTIES AND/OR REMEDIES.
IMPORTANT - READ THE TERMS AND CONDITIONS OF THIS END USER LICENSE AGREEMENT (THE "AGREEMENT") CAREFULLY BEFORE DOWNLOADING, INSTALLING, OR OTHERWISE USING THE NAC-DFD® APPLICATION (THE "PRODUCT") OR SOFTWARE, (THE "SOFTWARE"). BY DOWNLOADING, INSTALLING, USING, OR OTHERWISE ACCESSING THE PRODUCT AND THE SOFTWARE, YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, THAT YOU UNDERSTAND IT, THAT YOU AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS, AND THAT YOU ARE AT LEAST 18 YEARS OF AGE. IF YOU DO NOT AGREE TO THE TERMS AND CONDITIONS OF THIS AGREEMENT, PROMPTLY EXIT THIS PAGE WITHOUT DOWNLOADING AND/OR USING THE PRODUCT OR THE SOFTWARE.
1. LICENSE: Subject to the terms and limitations set forth herein, NAC Dynamics, LLC and Neubert Aero Corp. ("we" or "us") grants you a limited non-exclusive license to use the Product and the Software in accordance with the terms of this Agreement. All rights not expressly stated herein are reserved by NAC, and NAC disclaims any and all implied licenses. The copyright and all other rights to the Product and the Software will remain with us. You must reproduce any copyright or other notice marked on the Product and the Software on all copies you make.
2. YOU MAY:
a) install and use one royalty licence copy of the Product on a single Android™ mobile device for the sole purpose of enabling communication between your device and a NAC website or between your device and a third-party website who has separately enabled the NAC-DFD® Android™ AKI to allow communication between your mobile device and the third-party's website; and
b) install and use one copy of the Software on a single mobile device for use of the Software in accordance with this Agreement.
3. YOU MUST NOT:
a) make copies of the Product or Software except as expressly permitted in Section 2 of this Agreement;
b) translate, reverse engineer, decompile, or disassemble the Product or Software;
c) remove or alter any copyright, trademark or other proprietary rights notices contained in the Software or any other NAC content;
d) rent, lease, loan, sub-license, distribute, assign, or transfer the Product or Software;
e) transmit any viruses, worms, defects, Trojan horses, or any items of a destructive nature;
f) use the Product or Software for any unauthorized purpose or in violation of any applicable laws or regulations;
g) modify the Product or Software or merge all or any part of the Product or Software with another program; or
h) use the Product to communicate to or with any mobile devices or products other than those mobile devices approved for use by or for NAC and/or its subsidiaries.
4. TERM: This User License will continue for as long as you use the Product or the Software for two(2) year(s). However, this License will terminate automatically without notice from NAC if you fail to comply with any of its terms or conditions. Upon termination you must immediately cease using the Product and the Software and remove the Product and the Software from your mobile device. The Limitations of Warranties and Liability set out below will continue in force even after any termination.
5. LIMITATION OF WARRANTIES AND LIABILITY: THE PRODUCT AND SOFTWARE ARE PROVIDED ON AN "AS IS" BASIS, WITHOUT ANY WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR ANY WARRANTY ARISING BY LAW, STATUTE, USAGE OF TRADE, OR COURSE OF DEALING. YOU ASSUME ALL RESPONSIBILITY AND RISK FOR THE USE OF THE PRODUCT AND SOFTWARE AND FOR THE USE OF ANY THIRD-PARTY WEBSITE, AND NAC DISCLAIMS ALL LIABILITY FOR ANY LOSS, INJURY OR DAMAGE RESULTING FROM USE OF THE PRODUCT AND THE SOFTWARE AND ANY THIRD-PARTY WEBSITE, WHETHER DIRECT OR INDIRECT, AND WHETHER OR NOT NAC HAS BEEN ADVISED OF OR HAS KNOWLEDGE OF THE POSSIBILITY OF SUCH LOSS, INJURY OR DAMAGE. IN NO EVENT WILL NAC HAVE ANY LIABILITY TO YOU OR ANY OTHER PERSON OR ENTITY FOR ANY COMPENSATORY, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES WHATSOEVER, INCLUDING, BUT NOT LIMITED TO, LOSS OF REVENUE OR PROFIT, LOST OR DAMAGED DATA OR OTHER COMMERCIAL OR ECONOMIC LOSS, EVEN IF WE HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR THEY ARE FORESEEABLE. WE ARE ALSO NOT RESPONSIBLE FOR CLAIMS BY A THIRD PARTY. NAC'S TOTAL AGGREGATE LIABILITY WITH RESPECT TO ITS OBLIGATIONS UNDER THIS AGREEMENT OR OTHERWISE WITH RESPECT TO THE PRODUCT OR THE SOFTWARE WILL NOT EXCEED $1.00. THE LIMITATIONS IN THIS SECTION WILL APPLY WHETHER OR NOT THE ALLEGED BREACH OR DEFAULT IS A BREACH OF A FUNDAMENTAL CONDITION OR TERM OR A FUNDAMENTAL BREACH. Some states or countries do not allow the exclusion of incidental or consequential damages or the limitation of duration of an implied warranty so the above limitations may not apply to you.
6. RESTRICTED RIGHTS: If this Product or Software is acquired by or for the U.S. Government, then it is provided with Restricted Rights. Use, duplication, or disclosure by the U.S. Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of The Rights in Technical Data and Computer Software clause at DFARS 252.227-7018, or subparagraphs (c)(1) and (2) of the Commercial Computer Software - Restricted Rights at Title 14, Code of Federal Regulations (CFR), Part 139 (14 CFR Part 139), and ASTM E 2101 “Standard Test Method for Measuring the Friction Properties of Winter Contaminated Pavement Surfaces Using an Averaging-Type Spot Measuring Decelerometer”, as applicable. The contractor/ manufacturer is NAC Dynamics, LLC, 16110 Flight Path Drive, Brooksville, Florida 34604 USA.
7. EXPORT CONTROLS: You agree not to export or re-export the Product or the Software to any country in violation of the export control laws of the United States of America.
8. GENERAL: This Agreement is the entire agreement between us with respect to the subject matter hereof, superseding any other agreement or discussions, oral or written, and may not be changed except by a signed agreement. This Agreement will be governed by and construed in accordance with the laws of the State of Florida, United States of America. If any provision of this License is declared by a court of competent jurisdiction to be invalid, illegal, or unenforceable, such a provision will be severed from the Agreement and the other provisions will remain in full force and effect.
9. EAR: The Product or Software may contain information that is subject to the Export Administration Regulations ("EAR") issued by the United States Department of Commerce (15 C.F.R., Chapter VII Subchapter C) and that may not be exported, released or disclosed to certain destinations and foreign nationals except in compliance with U.S. law. The preceding statement is required to be included on any and all reproductions in whole or in part of the Product or Software.
10. INDEMNIFICATION: You agree to indemnify and hold harmless NAC Dynamics, LLC, Neubert Aero Corp. and its subsidiaries, affiliates, officers, agents, and employees, advertisers, licensors, and partners, from and against any third party claim arising from or in any way related to your use of the Product or Software, violation of this Agreement or any other actions connected with use of any content, including any liability or expense arising from all claims, losses, damages (actual and consequential), suits, judgments, litigation costs and attorneys' fees, of every kind and nature.
11. INTELLECTUAL PROPERTY: You acknowledge that Neubert Aero Corp. is the approved distributor of the NAC-DFT while NAC Dynamics, LLC owns all right, title and interest, including without limitation all intellectual property rights, in and to the Product and Software and that you will not acquire any right, title or interest in or to the Product or Software, except the limited license expressly set forth in this Agreement.
Industry standards require friction tires to be inflated to a specific pressure and any variation in tire pressure will result in incorrect Mu values, in turn providing false readings to airport safety inspectors and pilots. Tire pressure monitoring and calibration is a critical step in runway friction testing to ensure accurate results. NAC’s digital tire gauge kit complies to ASTM standards that states tire pressure of CFMEs and test vehicles must be calibrated prior to use. The kit includes a full-range (0-300 psi) tire pressure gauge, tire-tread-depth gauge, and angled and straight chucks. Chucks are mounted on tough, flexible hose handles to allow for comfortable readings of virtually all Schraeder-valve pneumatic wheels and tubes. Quick-disconnect couplings allow instant chuck change-out. This versatile digital kit measures air and other inert gases like nitrogen, making it the perfect all-in-one solution for aircraft, automobiles and trucks. Includes a rugged, foam-fit case.